1. Do not loosen or readjust the speed limit bolts and fuel controller bolts of the spray during operation, otherwise the mechanical performance will be directly affected.

2. If the external equipment of the continuous generator experiences abnormal operation, slow work, or sudden shutdown during operation, the switch of the generator set should be immediately turned off, the connection between the equipment and the unit should be disconnected, and the problem should be checked.

If current overload occurs and the circuit trips, the load on the circuit should be reduced and restarted after a few minutes.

4. The DC output terminal is only used for charging the battery. (Cannot be used for other types of loads)

5. Before charging the battery, be sure to cut off the wire on the negative pole of the battery. Connect the positive pole of the battery to the positive pole of the DC output terminal of the unit. Do not make the wrong connection, otherwise it will damage the unit and battery.

6. The total power output of DC and AC should not exceed the rated power of the unit, and the output current should not exceed the rated output current of the generator.

7. When adding medication, it is important to wear protective clothing, gloves, and a mask.

8. Do not touch the muffler and engine body when the diesel engine is running or has not completed cooling after shutdown, in order to avoid being burned by the high temperature emitted.

9. The generator should have a good grounding and it is forbidden to touch the generator set with damp hands to avoid electric shock accidents and short circuits.

10. Avoid spray from being exposed to rain or operating in rainy days.

11. It is strictly prohibited to spray high and low voltage agricultural power, grid power lines and facilities.

12. After the spray finishes spray, please wash the medicine box with clear water and spray with clear water for 2 minutes to complete the cleaning of the spraying parts.